Engine repair near Combe Martin, done properly
When an engine starts to fail, the nearest garage is not always the right answer. A general workshop can change oil and fit brakes, but rebuilding an engine is specialist work that needs measuring equipment, machining and experience of the faults that particular engines develop. We are that specialist. Drivers inCombe Martin use our collection service so they do not have to drive a damaged car anywhere, and they get a proper rebuild rather than a quick fix that fails again a few months later.
Our workshops are in Reading, Southampton, Leicester, Macclesfield, Manchester, and our transporters collect from Combe Martinand the whole of Yorkshire every week. Whether the car is on a driveway, at a garage that has given up, or on a fleet yard, we bring it in, strip the engine on the bench and rebuild it to a standard that will do many more miles. You deal with engineers who understand engines, not a call centre.
Common engine faults we repair for Combe Martin drivers
The engines that give the most trouble in the UK all follow recognisable failure patterns. These are the faults we see most often from vehicles collected in Combe Martin.
Oil starvation and bearing damage
When oil pressure drops the crankshaft bearings fail first. We measure the journals, grind or replace the crank, and rebuild the oil system so lubrication reaches every gallery at the correct pressure.
Head gasket and cylinder head faults
A failed head gasket lets coolant and oil mix. We pressure test the head, skim it true, fit a quality gasket and check the liners and valve seats before reassembly.
Timing chain and wet belt failure
Wet belts and timing chains degrade with oil that has lost its protective additives. We replace the belt or chain, the tensioners and the oil pump pick up, then flush the system so no debris reaches the new components.
Whatever the symptom, a rattle on start up, a warning light, rising oil temperature or smoke from the exhaust, the right move is to stop driving and get a proper diagnosis. Caught early, many of these faults are repairable for a fraction of the cost of a full replacement engine.
How our collection and rebuild service works in Combe Martin
- 1
Tell us about the vehicle
Send the registration, the mileage and the symptoms. We come back with a written price and a realistic timescale for collection from Combe Martin.
- 2
We collect from your door
A transporter picks the vehicle up from Combe Martin so there is no need to drive a damaged engine. Collection is arranged around you.
- 3
Strip, measure and rebuild
The engine is stripped on the bench, every component measured against manufacturer tolerances, and worn parts replaced with OEM components.
- 4
Test and return
The rebuilt engine is run, pressure tested and road tested, then the vehicle is returned to you in Combe Martin with a written warranty.
What it costs to rebuild an engine in Combe Martin
Engine repairs and rebuilds start at £2495.00. That figure covers the labour to strip and rebuild the engine and the parts needed to bring it back to a proper standard. The final price depends on the engine family, the extent of the damage and whether components like the crankshaft or cylinder head can be reused or must be replaced. You always get a written quote before any work starts, and we tell you honestly if a repair is not the right financial decision for your vehicle.
Compared with buying a second hand engine of unknown history, a proper rebuild is usually the safer spend. A used unit may already be on its way to the same failure, and you pay the fitting labour twice. Read more on our repair versus used engine page, or see typical pricing on the prices page.
A recent rebuild collected from Yorkshire
Ford Transit Custom 2.0 EcoBlue
Fleet van lost oil pressure after a wet belt shed its teeth. We flushed the oil system, replaced the belt kit and bearings, and had the van back earning within a week.
Frequently asked questions about engine repair in Combe Martin
Do you collect vehicles from Combe Martin?
Yes. Our collection service covers Combe Martin and the surrounding area in Yorkshire. A transporter collects the vehicle so it does not need to be driven with a damaged engine, and it is returned to you once the rebuild is complete.
How much does an engine rebuild cost in Combe Martin?
Repairs and rebuilds start at £2495.00. The final price depends on the engine and the damage found during the strip down. You receive a written quote before any work begins, with no obligation.
How long does an engine rebuild take?
Most rebuilds take between five and ten working days from collection, depending on parts availability and the extent of the damage. We give you a realistic timescale with your written quote.
Is the work guaranteed?
Every rebuild is covered by a written warranty and is road tested before the vehicle comes back to Combe Martin. We use OEM parts on every job and give clear advice on the first service.
Get a price for your engine repair in Combe Martin
Send us the registration, the mileage and a short note about the symptoms. We will tell you what we think has happened, what the repair involves and what it will cost. There is no charge for the quote and no pressure to book. If you would rather talk it through, call 0333 050 9802.
Other areas we collect from near Combe Martin
We cover 578 towns and areas across the United Kingdom. These are some of the places near Combe Martin that we collect from regularly.